Electrical Safety Mat
Shockproof quality Elastomeric compounds and PVC of High Voltage Class Types all along with Anti-skid deviations of Dielectric Strength Volts per unit thickness carpet.
Test Passed insulating mats as per IS15652, IEC61111, ASTM D-178.
Rubber Sheeting
High Tensile Strength quality compounded Synthetic Neoprene, EPDM, Viton, Silicone & Natural Rubber blend gasket material Pure Gum Sheet.
Test Passed as per IS5192, IS4253, BS2751/2752, ISO868.
Insertion Sheets
High Pressure Resistant SBR, Nitrile, CR, RMA Rubber Reinforced with Textile Nylon/ Cotton Ply fabric layer flange packing.
Test Passed sheet as per IS638.
Produced & Exported under the brand name “HIC Universal”, an ISO 9001 certified Manufacturing company.
CREDENTIALS as to quality industries supplies & true performance, Click Menu Tab.
TC, COC of SAFETY MAT, SHEETING TESTING
Test Certificate and Material COC of Manufacturer, HIC make insulating safety mat, rubber sheeting rolls in-house Lab Testing, TC forwarded along-with the supplies.
Also, on EXTRA cost, from an independently accredited India Test Facility, like DNV, CPRI, ERDA, SGS, PDIL or any Govt. approved laboratory OR other Third-Party Inspection agencies.
CUSTOMERS of HIC SAFETY RUBBER ROLL
HIC’s safety rubber roll(s) are trusted by OEMs in ASIA of:
- HT/LT Control Panels manufacturers,
- Electrical Substation Construction companies,
- Low Tension & High-Tension Switchboard Fitting service contractors,
- Power Transformer producers,
- Telecommunication Data Centers,
- Acid & Water Tank Lining fitters,
- Dairy and Livestock Equipment suppliers,
- Gasket makers and Importers in Kuwait, Saudi Arabia, UAE, Qatar, Kazakhstan, Hong Kong, Taiwan, China, South America, Africa, Canada, USA, NZ, Australia, Dominican Rep., Czech, UK
- Direct Manufacturing Industries like power plants, oil refinery, electronics factory customers.
Featured ranges
Section 01 of 3
PRODUCTION CAPABILITIES Of INSULATING MATTING TYPES
Manufacturing range types of HIC UNIVERSAL Insulating Matting for electrical safety purposes around high voltage switchboard panels production capabilities consist of:
4 products
Browse the range: PRODUCTION CAPABILITIES Of INSULATING MATTING TYPESSection 02 of 3
PRODUCTION CAPABILITIES Of RUBBER SHEETING TYPES
Rubber Sheeting are produced of Compounded synthetic rubbers polymer types in Smooth or Fabric Finish sheeting of 1m/1.2m standard Width, 2m/5m/10m Length production capabilities of sheet rubber consist of:
7 products
Browse the range: PRODUCTION CAPABILITIES Of RUBBER SHEETING TYPESSection 03 of 3
Dielectric Rubber Sheet & Die Cut Packing Gasket Material Specialization
Insulating Mats making specialty being Fine Rib Finish on Top, Texture Finish on Top, Anti-slip Carpet, Oil & moisture Resistant, Different Color making Options besides standard Black rubber sheets for easy identification of proof voltage at various installations as per dielectric current safety.
Browse the range: Dielectric Rubber Sheet & Die Cut Packing Gasket Material SpecializationWhy HIC Universal Electrical Switchboard Mats?
- Excellent Shock Protection Tested 40 KV Surface Proof Mats
- High Working Voltage and Electrical Spark Resistant up to 36 KV
- Anti-slip Textured, Fine Ribbed, Chequered Design
Section 01
PRODUCTION CAPABILITIES Of INSULATING MATTING TYPES
Manufacturing range types of HIC UNIVERSAL Insulating Matting for electrical safety purposes around high voltage switchboard panels production capabilities consist of:
- Class 0,1,2,3,4 Insulation Mats for Working Voltages from 1000V to 36 kV safety floor covering up to 10mm Thickness as per IEC 61111;
- Class 0,1,2,3,4 Switchboard Matting for Working Voltages from 1000V to 36 kV safety floor covering up to 14mm Thickness as per ASTM D178, Type I, II;
- Class A, B, C Insulating Safety Mat for Working Voltages from 3300V to 33 kV HT & LT Panels floor covering up to 8mm Thickness as per IS 15652;
- Electrical Mat for Working Voltages from 400V to 33 kV Substation floor covering up to 8mm Thickness as per IS 5424.
THICKNESS, CLASS AS PER IEC61111 HIGH VOLTAGE MATS PRODUCED
High Voltage Mats Class Types and Thickness as per IEC/BS EN61111 standards:
Specification13 lines
- 0 class/ 2mm Thick minimum (working voltage 1KV),
- 1cl/ 2.5mmT min. (W.V 7.5KV),
- 2cl/ 3mmT min. (W.V 17KV),
- 3cl/ 3.5mmT min. (W.V 26.5KV),
- 4cl/ 5mmT min. (W.V 36KV).
- Dielectric Strength Test Passed:
- 10KV, 20KV, 30KV, 40KV, 50KV respectively.
- Proof Voltage Tested Ac:
- 5KV (0 Cl), 10KV (1 Cl), 20KV (2 Cl), 30KV (3 Cl), 40KV (4 Cl).
- Sizes produced standard 1m/1.2m/1.5m Width x 2/5/10/15m Length.
- Pattern: Textured Top & Bottom, Fine Ribbed Top & Textured Bottom.
- Color- Black. Grey Dark/ Orange/ Blue (optional on bulk qty.)
- Thickness produced- 2mm Min.; 10mm Max.
THICKNESS, CLASS AS PER ASTM D178 DIELECTRIC CARPET PRODUCED
Dielectric Carpet Class Types and Thickness as per ASTM D178 standards:
Specification13 lines
- 0 class/ 3.2mm Thick minimum (working voltage 1KV),
- 1cl/ 4.8mmT min. (W.V 7.5KV),
- 2cl/ 6.4mmT min. (W.V 17KV),
- 3cl/ 9.5mmT min. (W.V 26.5KV),
- 4cl/ 12.7mmT min. (W.V 36KV).
- Dielectric Strength Test Passed:
- 6KV, 20KV, 30KV, 40KV, 50KV respectively.
- Proof Voltage Tested Ac:
- 5KV (0 Cl), 10KV (1 Cl), 20KV (2 Cl), 30KV (3 Cl), 40KV (4 Cl).
- Dimensions produced: standard 1m/1.2m/1.5m W x 7.5/10/15m L.
- Pattern: Fine Ribbed Top & Textured Bottom.
- Color: Black. Grey Dark (optional on bulk qty.)
- Thickness produced- 3.2mm Min.; 14mm Max.
THICKNESS, CLASS AS PER IS15652 INSULATING MAT PRODUCED
Insulating Mat Class Types and Thickness as per IS15652 standards:
Specification11 lines
- A class/ 2mm Thick minimum (working voltage 3.3KV),
- B cl/ 2.5mmT min. (W.V 11KV),
- C cl/ 3mmT min. (W.V 33KV).
- Dielectric Strength Test Passed:
- 30KV, 45KV, 65KV respectively.
- Proof Voltage Tested Ac:
- 10KV (A Cl), 22KV (B Cl), 36KV (C Cl).
- Size produced standard 1m/1.2m/1.5m W x 10/15/20/25m L.
- Pattern: Dotted/ Textured Top & Textured Bottom.
- Color- Black/ Blue. Grey/ Green/ Yellow/ Red (optional upon bulk qty.)
- Thickness produced- 2mm Min.; 8mm Max.
THICKNESS, VOLTAGE AS PER IS5424 ELECTRICAL RUBBER MAT PRODUCED
Electrical Rubber Mat Types and Thickness as per IS5424 standards:
Specification14 lines
- 6mm Thickness (working voltage 0.4KV),
- 8mm Thick (W.V 1KV),
- 10mmT (W.V 7.5KV),
- 12.5mmT (W.V 11KV),
- 16mmT (W.V 17KV),
- 19mmT (W.V 22KV),
- 25mmT (W.V 33KV).
- Dielectric Strength Test Passed:
- 40KV for All thickness.
- Proof Voltage Tested Ac:
- 15KV for All thickness.
- Size produced standard 1m W x 2m L, 0.9m x 1.8m
- Pattern: Checkered Anti-Skid Top
- Color: Black. Red (optional upon bulk qty.)
Why HIC Universal Gasket Rubber Sheets?
- Ozone-proof SBR, EPDM, Neoprene CR, Viton Rubber Protective Seal
- Excellent Compression Set Insertion Ply RMA, Silicone Padding
- Friction-proof Nitrile Cork and Corrosion-proof NBR Jointing Sheets
Section 02
PRODUCTION CAPABILITIES Of RUBBER SHEETING TYPES
Rubber Sheeting are produced of Compounded synthetic rubbers polymer types in Smooth or Fabric Finish sheeting of 1m/1.2m standard Width, 2m/5m/10m Length production capabilities of sheet rubber consist of:
EPDM, Potable Water EPDM, Neoprene/ Chloroprene, Silicone, Food Grade NBR, Nitrile NBR, SBR, Shot Blasting, Natural/ RSS, Insertion Jointing Rubber, Rubberized Cork Nitrile/ Neoprene Bonded, Viton/ FKM, Skirt Rubber NR/SBR Blend, Non-Slip Rubber Flooring Fine Rib, Pulley Lagging Diamond Groove NR Rubber, Cow Shed Matting Hammer top with Hollow bottom (Interlocking).
ALL-WEATHER EPDM, MULTIPURPOSE NEOPRENE SHEET MANUFACTURED
Specification6 lines
- EPDM rubber sheet, All-Weather, Acid & Heat Resistant up to 140C, Outdoor Roofing Protection as per ASTM D1418.
- Thickness manufactured: 2-10mm; SG: 1.4 (+/-0.10); TS: 5 Mpa (Av.); EL: 225% (Min, Av.)
- Potable Water EPDM, Ponds & Tanks Lining Temp. Resistant up to 140C, Membrane as per BS6920-1.
- Thickness: 1.5-3mm; SG: 1.15 (+/-0.10); TS: 9 Mpa (Av.); EL: 300% (Min, Av.)
- Neoprene/Chloroprene sheeting, Multipurpose Oil, Ozone & Temp. Resistant up to 100C as per BS2752.
- Thickness: 2-10mm; SG: 1.45 (+/-0.10); TS: 7 Mpa (Av.); EL: 250% (Min, Av.)
CONDUCTIVE SILICONE, OIL-RESISTANT NITRILE SHEET PRODUCED
Specification6 lines
- Silicone rubber sheet, Thermal Conductive High Temperature Resistant up to 230C, Aerospace Gasket in Red or Translucent color.
- Thickness: 2-10mm; SG: 1.3 (+/-0.10); TS: 6 Mpa (Av.); EL: 250% (Min, Av.)
- Food Grade NBR, Beverage Contamination Prevention & Temp. Resistant up to 110C, Off-White color sheeting.
- Thickness: 2-6mm; SG: 1.40 (+/-0.10); TS: 6 Mpa (Av.); EL: 300% (Min, Av.)
- Nitrile NBR sheeting, Petroleum & Oil-Resistant, Tank & Drilling Lining rubber Temp. Resistant up to 110C as per BS2751.
- Thickness produced: 2-10mm; SG: 1.45 (+/-0.10); TS: 4 Mpa (Av.); EL: 250% (Min, Av.)
SHOCK-ABSORPTION SBR, SHOT BLASTING NATURAL SHEET PRODUCED
Specification6 lines
- SBR rubber sheet, Hot Water Heat Resistant up to 80C, Shock-Absorption, Work Benches Protection Sheeting.
- Thickness: 2-25mm; SG: 1.55 (+/-0.10); TS: 3 Mpa (Av.); EL: 200% (Min, Av.)
- Shot Blasting, Abrasion & Temp. Resistant up to 65C Sheet in colors Black standard/ Beige/ Red.
- Thickness produced: 2-12mm; SG: 1.35 (+/-0.10); TS: 7 Mpa (Av.); EL: 300% (Min, Av.)
- Natural/ RSS, Water & Temperature Resistant up to 65C, Floor Protection, Packing, Mining Chute & Pump Linings as per IS5192, BS1154.
- Thickness: 2-25mm; SG: 1.55 (+/-0.10); TS: 3 Mpa (Av.); EL: 200% (Min, Av.)
TRANSFORMER SEALANT RUBBERIZED CORK, FLANGES INSERTION SHEET
Specification6 lines
- Rubberized Cork Nitrile/ Neoprene Bonded rubber sheet, Transformer & Switchgear Oil Sealant & Acoustic Insulation Heat Resistant up to 110C as per IS4253, ASTM F104.
- Sizes: 600mm (2ft) x 900mm (3ft), 900mm (3ft) x 1800mm (6ft) and 1M x 1M
- Thick: 3-12mm; Compression Set: 85% (Max); TS: 1.25Mpa (Av.); Vol: 25% change
- Type: RC70 - C (R = Rubber, C= Cork); Shore Hardness(A): 70-80
- Insertion Jointing Rubber, 1or 2 Ply Nylon/ Cotton Ply sheeting, Flanges Impact Absorption in SBR, Natural rubbers blended as per IS638.
- Thickness made: 2-25mm; SG: 1.65 (+/-0.10); TS: 2 Mpa (Av.); EL: 150% (Min, Av.)
ULTRA-HEAT RESISTANT VITON SHEET, GYM FLOORING MANUFACTURED
- Viton/ FKM, Chemicals & Ultra-Heat Resistant up to 300C as per ASTM D1418.
- Thickness: 1.5-25mm; SG: 1.95 (+/-0.10); TS: 8 Mpa (Av.); EL: 200% (Min, Av.)
- Non-Slip Rubber Flooring Fine Rib, Gym, Play & Commercial Area, Noise Reducer
- Thickness manufactured: 3-6mm; Width: 1m, 1.2m; Shore A: 70 (+/-5)
- SG: 1.55 (+/-0.10); TS: 3 Mpa (Av.); EL: 200% (Min, Av.)
SKIRT CONVEYOR SEALING, DIAMOND LAGGING SHEET PRODUCED
Specification11 lines
- Skirt Rubber NR/SBR Blend, Abrasion Resistant Material-Spill Sealing Belt Sides at Conveyor Transfer Points, Dust Minimizer Under Feed Chute as per ISO868.
- Thickness produced: 8-25mm; Width: 150-400mm; Length: 2/5/10M
- Shore Hardness A: 55 (+/-5); Color: BLACK, Red
- TS: 5 Mpa (Av.); EL: 250% (Min, Av.)
- Pulley Lagging Diamond Groove NR Rubber, Drum Conveyor Sheet Without Bonding Sheet as per ISO1629, DIN53516, DIN53479.
- Thickness: 8-20mm; Width: 1m, 1.2m; Shore A: 60 (+/-5)
- Length: 2/5/10M single roll; Pattern: Diamond Top, standard or also, Plain.
- TS: 5 Mpa (Av.); EL: 250% (Min, Av.); SG: 1.35 (+/-0.10)
- Wear factor: 80 mm3; Color: BLACK, Red
- Rubber Grade manufactured: NR standard, Temp: - 25 to 80°C
- Also, in SHR Grade EPDM, Temp. - 35 to 180°C; Neoprene FRAS quality for mines.
COW MATS For ANIMAL SAFETY MANUFACTURED
- Cow Shed Matting Hammer top with Hollow bottom (Interlocking), Non-Slip, Anti-Bacterial Surface ANIMAL SAFETY and CATTLE COMFORT Mats.
- Thickness manufactured: 17mm; Size (w x l): 4ft (=1.2m) x 6ft; Shore A: 60 (+/-5)
- Weight (KG): 40 (+/-1); TS: 3 Mpa (Av.); EL: 200% (Min, Av.)
Section 03
Dielectric Rubber Sheet & Die Cut Packing Gasket Material Specialization
Insulating Mats making specialty being Fine Rib Finish on Top, Texture Finish on Top, Anti-slip Carpet, Oil & moisture Resistant, Different Color making Options besides standard Black rubber sheets for easy identification of proof voltage at various installations as per dielectric current safety.
Rubber Sheet customized specialty, cut to size sheeting from the standard dimensions to facilitate die cut gasket makers to achieve sealing & packing material requirements faster.
Long-term Safety in Electrical Hazards Area and Insulation Sealing
High Voltage Shockproof Non-conductive Tested and Fire-Retardant aspect advantage of HIC Electrical Mats are proven for substation floors, switchboard zones, high-voltage control panels, electrical grid, transformers and busbars nearby surface sealing, live circuits insulation uses for dielectric safe long-term safety reliable protection in electrical hazards area.
Quality Resistance to Water, Weather, Steam, Oil, Chemicals & Compression Set features advantage of HIC Synthetic Rubber Sheet is proven for fluids sealing, cushioning, waterproofing, heat insulation, noise absorbing, vibration damping, skirt board of belt conveyor transfer chutes, etc. safer environment sealing applications for durable sealing reliable performance.